Type SPKD
Technical specification
Technical specification
mm
Type | SPK 12D | SPK 25D | SPK 50D | SPK 100D | SPK 150D |
---|---|---|---|---|---|
Lifting capacity (kg) | 2 400 | 5 000 | 10 000 | 20 000 | 30 000 |
Lifting (mm) | 1 000 | 1 100 | 1 200 | 1 800 | 2 000 |
Torque table (Nm) | 9 220 | 21 180 | 61 184 | 106 500 | 283 000 |
Table turning speed (rpm) | 0,06 - 0,7 | 0,1 – 1,2 | 0,08 – 1 | 0,06 – 0,8 | 0,03 – 0,4 |
Lifting speed (mm) | 1,6 | 1,6 | 1,6 | 1,2 | 1,1 |
Table rotation radius (°) | +/- 360 | +/- 360 | +/- 360 | +/- 360 | +/- 360 |
A (mm) | 1 280 | 1 500 | 1 600 | 2 200 | 2 400 |
B (mm) | 1 200 | 1 270 | 2 000 | 1 900 | 1 200 |
C (mm) | 2 640 | 3 090 | 3 460 | 4 310 | 4 950 |
D (mm) | 800 | 850 | 900 | 1 100 | 1 250 |
DS (mm) | 1 500 – 5 000 | 2 000 – 8 000 | 2 000 – 12 000 | 2 000 – 22 000 | 3 000 – 30 000 |
H1 – H2 (mm) | 735 – 1 735 | 835 – 1 935 | 960 – 2 160 | 1 080 – 2 880 | 1 285 – 3 285 |

- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the table by means of a radial-axial bearing driven by an electric motor, stroke by hydraulic cylinders – driven by cylinders from a fixed hydraulic unit driven by an electric motor.
- The welding positioner requires anchoring.
- Fixed clamping to the floor or to the floor clamping rails (not included in the delivery of the positioner).
Type | SPK 12D | SPK 25D | SPK 50D | SPK 100D | SPK 150D |
---|---|---|---|---|---|
Lifting capacity (kg) | 2 400 | 5 000 | 10 000 | 20 000 | 30 000 |
Lifting (mm) | 1 000 | 1 100 | 1 200 | 1 800 | 2 000 |
Torque table (Nm) | 9 220 | 21 180 | 61 184 | 106 500 | 283 000 |
Table turning speed (rpm) | 0,06 - 0,7 | 0,1 – 1,2 | 0,08 – 1 | 0,06 – 0,8 | 0,03 – 0,4 |
Lifting speed (mm) | 1,6 | 1,6 | 1,6 | 1,2 | 1,1 |
Table rotation radius (°) | +/- 360 | +/- 360 | +/- 360 | +/- 360 | +/- 360 |
A (mm) | 1 280 | 1 500 | 1 600 | 2 200 | 2 400 |
B (mm) | 1 200 | 1 270 | 2 000 | 1 900 | 1 200 |
C (mm) | 2 640 | 3 090 | 3 460 | 4 310 | 4 950 |
D (mm) | 800 | 850 | 900 | 1 100 | 1 250 |
DS (mm) | 1 500 – 5 000 | 2 000 – 8 000 | 2 000 – 12 000 | 2 000 – 22 000 | 3 000 – 30 000 |
H1 – H2 (mm) | 735 – 1 735 | 835 – 1 935 | 960 – 2 160 | 1 080 – 2 880 | 1 285 – 3 285 |

- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the table by means of a radial-axial bearing driven by an electric motor, stroke by hydraulic cylinders – driven by cylinders from a fixed hydraulic unit driven by an electric motor.
- The welding positioner requires anchoring.
- Fixed clamping to the floor or to the floor clamping rails (not included in the delivery of the positioner).
inch
Type | SPK 12 | SPK 25 | SPK 50 | SPK 100 | SPK 150 |
---|---|---|---|---|---|
Nosnosť (kg) | 1 200 | 2 500 | 5 000 | 10 000 | 15 000 |
Krútiaci moment stola (Nm) | 2 530 | 4 780 | 8 895 | 29 380 | 60 330 |
Krútiaci moment ramena (Nm) | 4 610 | 10 590 | 30 592 | 53 250 | 141 500 |
Rýchlosť zdvihu (m/min) | 1,6 | 1,6 | 1,6 | 1,2 | 1,1 |
Rýchlosť otáčania stola (ot/min) | 0,1 – 1,1 | 0,1 – 1,4 | 0,1 – 1,3 | 0,05 – 0,7 | 0,04 – 0,6 |
Rýchlosť otáčania ramena (ot/min) | 0,06 – 0,7 | 0,1 – 1,2 | 0,08 - 1 | 0,06 – 0,8 | 0,03 – 0,4 |
A (mm) | 3 055 | 3 540 | 4 590 | 5 820 | 6 190 |
B (mm) | 1 280 | 1 500 | 2 000 | 2 200 | 2 400 |
C (mm) | 2 640 | 3 090 | 3 460 | 4 310 | 4 950 |
D (mm) | 800 | 850 | 900 | 1 100 | 1 250 |
E (mm) | 1 200 | 1 550 | 2 200 | 2 800 | 3 000 |
F (mm) | 116 | 160 | 170 | 250 | 325 |
Zdvih (mm) | 1 000 | 1 100 | 1 200 | 1 800 | 2 000 |
H1 – H2 (mm) | 620 – 1 620 | 680 – 1 780 | 780-2 020 | 810-2 610 | 960 – 2 960 |
Hmotnosť (kg) | 2 240 | 4 150 | 7 200 | 12 850 | 18 550 |

- Otáčanie ramena a stola pomocou radiálno-axiálneho ložiska pohonom elektromotora, zdvih ramena hydraulickými valcami – pohon valcov z pevnej hydraulickej jednotky poháňanej elektromotorom
- Možnosť posunu ramena a tým zmena polohy ťažiska polohovaného zvarenca
- Polohovadlo vyžaduje kotvenie do podlahy alebo do oceľovej platne
Type | SPK 12 | SPK 25 | SPK 50 | SPK 100 | SPK 150 |
---|---|---|---|---|---|
Nosnosť (kg) | 1 200 | 2 500 | 5 000 | 10 000 | 15 000 |
Krútiaci moment stola (Nm) | 2 530 | 4 780 | 8 895 | 29 380 | 60 330 |
Krútiaci moment ramena (Nm) | 4 610 | 10 590 | 30 592 | 53 250 | 141 500 |
Rýchlosť zdvihu (m/min) | 1,6 | 1,6 | 1,6 | 1,2 | 1,1 |
Rýchlosť otáčania stola (ot/min) | 0,1 – 1,1 | 0,1 – 1,4 | 0,1 – 1,3 | 0,05 – 0,7 | 0,04 – 0,6 |
Rýchlosť otáčania ramena (ot/min) | 0,06 – 0,7 | 0,1 – 1,2 | 0,08 - 1 | 0,06 – 0,8 | 0,03 – 0,4 |
A (mm) | 3 055 | 3 540 | 4 590 | 5 820 | 6 190 |
B (mm) | 1 280 | 1 500 | 2 000 | 2 200 | 2 400 |
C (mm) | 2 640 | 3 090 | 3 460 | 4 310 | 4 950 |
D (mm) | 800 | 850 | 900 | 1 100 | 1 250 |
E (mm) | 1 200 | 1 550 | 2 200 | 2 800 | 3 000 |
F (mm) | 116 | 160 | 170 | 250 | 325 |
Zdvih (mm) | 1 000 | 1 100 | 1 200 | 1 800 | 2 000 |
H1 – H2 (mm) | 620 – 1 620 | 680 – 1 780 | 780-2 020 | 810-2 610 | 960 – 2 960 |
Hmotnosť (kg) | 2 240 | 4 150 | 7 200 | 12 850 | 18 550 |

- Rozmery zváracieho polohovadla sa môžu odlišovať podľa konkrétnej konfigurácie.
- Zváracie polohovadlo vyžaduje kotvenie
- Pevné upnutie do podlahy, prípadne do podlahových upínacích líšt (nie sú súčasťou dodávky polohovadla)
mm
Type | SPK 12D | SPK 25D | SPK 50D | SPK 100D | SPK 150D |
---|---|---|---|---|---|
Lifting capacity (kg) | 2 400 | 5 000 | 10 000 | 20 000 | 30 000 |
Lifting (mm) | 1 000 | 1 100 | 1 200 | 1 800 | 2 000 |
Torque table (Nm) | 9 220 | 21 180 | 61 184 | 106 500 | 283 000 |
Table turning speed (rpm) | 0,06 - 0,7 | 0,1 – 1,2 | 0,08 – 1 | 0,06 – 0,8 | 0,03 – 0,4 |
Lifting speed (mm) | 1,6 | 1,6 | 1,6 | 1,2 | 1,1 |
Table rotation radius (°) | +/- 360 | +/- 360 | +/- 360 | +/- 360 | +/- 360 |
A (mm) | 1 280 | 1 500 | 1 600 | 2 200 | 2 400 |
B (mm) | 1 200 | 1 270 | 2 000 | 1 900 | 1 200 |
C (mm) | 2 640 | 3 090 | 3 460 | 4 310 | 4 950 |
D (mm) | 800 | 850 | 900 | 1 100 | 1 250 |
DS (mm) | 1 500 – 5 000 | 2 000 – 8 000 | 2 000 – 12 000 | 2 000 – 22 000 | 3 000 – 30 000 |
H1 – H2 (mm) | 735 – 1 735 | 835 – 1 935 | 960 – 2 160 | 1 080 – 2 880 | 1 285 – 3 285 |

- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the table by means of a radial-axial bearing driven by an electric motor, stroke by hydraulic cylinders – driven by cylinders from a fixed hydraulic unit driven by an electric motor.
- The welding positioner requires anchoring.
- Fixed clamping to the floor or to the floor clamping rails (not included in the delivery of the positioner).
Type | SPK 12D | SPK 25D | SPK 50D | SPK 100D | SPK 150D |
---|---|---|---|---|---|
Lifting capacity (kg) | 2 400 | 5 000 | 10 000 | 20 000 | 30 000 |
Lifting (mm) | 1 000 | 1 100 | 1 200 | 1 800 | 2 000 |
Torque table (Nm) | 9 220 | 21 180 | 61 184 | 106 500 | 283 000 |
Table turning speed (rpm) | 0,06 - 0,7 | 0,1 – 1,2 | 0,08 – 1 | 0,06 – 0,8 | 0,03 – 0,4 |
Lifting speed (mm) | 1,6 | 1,6 | 1,6 | 1,2 | 1,1 |
Table rotation radius (°) | +/- 360 | +/- 360 | +/- 360 | +/- 360 | +/- 360 |
A (mm) | 1 280 | 1 500 | 1 600 | 2 200 | 2 400 |
B (mm) | 1 200 | 1 270 | 2 000 | 1 900 | 1 200 |
C (mm) | 2 640 | 3 090 | 3 460 | 4 310 | 4 950 |
D (mm) | 800 | 850 | 900 | 1 100 | 1 250 |
DS (mm) | 1 500 – 5 000 | 2 000 – 8 000 | 2 000 – 12 000 | 2 000 – 22 000 | 3 000 – 30 000 |
H1 – H2 (mm) | 735 – 1 735 | 835 – 1 935 | 960 – 2 160 | 1 080 – 2 880 | 1 285 – 3 285 |

- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the table by means of a radial-axial bearing driven by an electric motor, stroke by hydraulic cylinders – driven by cylinders from a fixed hydraulic unit driven by an electric motor.
- The welding positioner requires anchoring.
- Fixed clamping to the floor or to the floor clamping rails (not included in the delivery of the positioner).
inch
Type | SPK 12D | SPK 25D | SPK 50D | SPK 100D | SPK 150D |
---|---|---|---|---|---|
Lifting capacity (lb) | 5291 | 11 023 | 22 046 | 44 092 | 66 139 |
Lifting (ft in) | 3,28 | 3,61 | 3,94 | 5,91 | 6,56 |
Torque table (lb ft) | 6 800,32 | 15 621,56 | 45 127 | 78 550,37 | 208 730,09 |
Table turning speed (rpm) | 0,06 - 0,7 | 0,1 – 1,2 | 0,08 – 1 | 0,06 – 0,8 | 0,03 – 0,4 |
Lifting speed (fpm) | 5,25 | 5,25 | 5,25 | 3,94 | 3,61 |
Table rotation radius (rad) | +/- 6,28 | +/- 6,28 | +/- 6,28 | +/- 6,28 | +/- 6,28 |
A (ft in) | 4,2 | 4,92 | 5,25 | 7,22 | 7,87 |
B (ft in) | 3,94 | 4,17 | 6,56 | 6,23 | 3,94 |
C (ft in) | 8,66 | 10,1 | 11,4 | 14,1 | 16,2 |
D (ft in) | 2,62 | 2,79 | 2,95 | 3,61 | 4,1 |
DS (ft in) | 4,92 – 16,4 | 6,56 – 26,2 | 6,56 – 39,4 | 6,56 – 72,2 | 9,84 – 98,4 |
H1 – H2 (ft in) | 2,41 – 5,69 | 2,74 – 6,35 | 3,15 – 7,09 | 3,54 – 9,45 | 4,22 – 10,8 |

- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the table by means of a radial-axial bearing driven by an electric motor, stroke by hydraulic cylinders – driven by cylinders from a fixed hydraulic unit driven by an electric motor
- The welding positioner requires anchoring
- Fixed clamping to the floor or to the floor clamping rails (not included in the delivery of the positioner).
Type | SPK 12D | SPK 25D | SPK 50D | SPK 100D | SPK 150D |
---|---|---|---|---|---|
Lifting capacity (lb) | 5291 | 11 023 | 22 046 | 44 092 | 66 139 |
Lifting (ft in) | 3,28 | 3,61 | 3,94 | 5,91 | 6,56 |
Torque table (lb ft) | 6 800,32 | 15 621,56 | 45 127 | 78 550,37 | 208 730,09 |
Table turning speed (rpm) | 0,06 - 0,7 | 0,1 – 1,2 | 0,08 – 1 | 0,06 – 0,8 | 0,03 – 0,4 |
Lifting speed (fpm) | 5,25 | 5,25 | 5,25 | 3,94 | 3,61 |
Table rotation radius (rad) | +/- 6,28 | +/- 6,28 | +/- 6,28 | +/- 6,28 | +/- 6,28 |
A (ft in) | 4,2 | 4,92 | 5,25 | 7,22 | 7,87 |
B (ft in) | 3,94 | 4,17 | 6,56 | 6,23 | 3,94 |
C (ft in) | 8,66 | 10,1 | 11,4 | 14,1 | 16,2 |
D (ft in) | 2,62 | 2,79 | 2,95 | 3,61 | 4,1 |
DS (ft in) | 4,92 – 16,4 | 6,56 – 26,2 | 6,56 – 39,4 | 6,56 – 72,2 | 9,84 – 98,4 |
H1 – H2 (ft in) | 2,41 – 5,69 | 2,74 – 6,35 | 3,15 – 7,09 | 3,54 – 9,45 | 4,22 – 10,8 |

- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the table by means of a radial-axial bearing driven by an electric motor, stroke by hydraulic cylinders – driven by cylinders from a fixed hydraulic unit driven by an electric motor
- The welding positioner requires anchoring
- Fixed clamping to the floor or to the floor clamping rails (not included in the delivery of the positioner).
3D Model

Advantages of positioners KOVACO
- High reliability
- Minimal maintenance
- Work comfort
- Employee safety
- Reduced welding costt
- Increased efficiency
- Investment with a quick return on production
3D Model

Advantages of positioners KOVACO
- High reliability
- Minimal maintenance
- Work comfort
- Employee safety
- Reduced welding costt
- Increased efficiency
- Investment with a quick return on production
Need help?

Message me
Positioners of the same category
Positioners of the same category
Hover Video 01
Type SPDL
- Designed for manual welding
Hover Video 01
Type SPK
- Designed for manual welding
Hover Video 01
Type SP
- Designed for manual welding
Hover Video 01
Type SPDL
- Designed for manual welding
Hover Video 01
Type SPK
- Designed for manual welding
Hover Video 01
Type SP
- Designed for manual welding