Type PP
Welding positioner type - PP
- Table lift
- Table rotation
- Table tilting
- Designed for manual welding
- Positioner does not require anchoring
The welding positioner can be customized according to requirements such as the size, shape, and design of the clamping table, the use, and design of the welding fixture, and the equipment of the positioner with a control system for position programming.
Welding positioner - PP
- Table lift
- Table rotation
- Table tilting
- Designed for manual welding
- Positioner does not requires anchoring
The welding positioner can be customized according to requirements such as the size, shape, and design of the clamping table, the use, and design of the welding fixture, and the equipment of the positioner with a control system for position programming.
Technical specification
Technical specification
mm
| Type | PP 8 | PP 15 | PP 30 | PP 50 | PP 100 |
|---|---|---|---|---|---|
| Lifting capacity (kg) | 800 | 1 500 | 3 000 | 5 000 | 10 000 |
| Lifting (mm) | 625 | 660 | 695 | 800 | 1 050 |
| Table tilting torque (Nm) | 1 700 | 3 000 | 10 000 | 15 000 | 30 000 |
| Torque table (Nm) | 750 | 2 600 | 5 300 | 7 400 | 17 200 |
| Table tilting speed (°/min) | 123 | 215 | 190 | 175 | 155 |
| Table turning speed (rpm) | 0,1 – 1,7 | 0,1 – 1,5 | 0,1 – 1,4 | 0,04 – 0,6 | 0,06 – 0,9 |
| Lifting speed (m/min) | 1,2 | 1,7 | 1,1 | 1,1 | 1 |
| Table rotation radius (°) | 100 | 100 | 100 | 95 | 95 |
| A (mm) | 1 700 | 1 750 | 2 120 | 2 550 | 3 100 |
| B (mm) | 700 | 850 | 1 000 | 1 230 | 1 500 |
| C (mm) | 725 | 775 | 980 | 1 220 | 1 200 |
| D (mm) | 700 | 800 | 850 | 1 000 | 1 250 |
| H1 – H2 (mm) | 725 – 1 350 | 775 – 1 435 | 980 – 1 675 | 1 100 – 1 900 | 1 200 – 2 300 |
- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the arm and table by means of a radial-axial bearing driven by an electric motor, lifting of the arm by hydraulic cylinders – drive of cylinders from a fixed hydraulic unit driven by an electric motor.
- The positioner does not require anchoring to the floor or to a steel plate.
| Type | PP 8 | PP 15 | PP 30 | PP 50 | PP 100 |
|---|---|---|---|---|---|
| Lifting capacity (kg) | 800 | 1 500 | 3 000 | 5 000 | 10 000 |
| Lifting (mm) | 625 | 660 | 695 | 800 | 1 050 |
| Table tilting torque (Nm) | 1 700 | 3 000 | 10 000 | 15 000 | 30 000 |
| Torque table (Nm) | 750 | 2 600 | 5 300 | 7 400 | 17 200 |
| Table tilting speed (°/min) | 123 | 215 | 190 | 175 | 155 |
| Table turning speed (rpm) | 0,1 – 1,7 | 0,1 – 1,5 | 0,1 – 1,4 | 0,04 – 0,6 | 0,06 – 0,9 |
| Lifting speed (m/min) | 1,2 | 1,7 | 1,1 | 1,1 | 1 |
| Table rotation radius (°) | 100 | 100 | 100 | 95 | 95 |
| A (mm) | 1 700 | 1 750 | 2 120 | 2 550 | 3 100 |
| B (mm) | 700 | 850 | 1 000 | 1 230 | 1 500 |
| C (mm) | 725 | 775 | 980 | 1 220 | 1 200 |
| D (mm) | 700 | 800 | 850 | 1 000 | 1 250 |
| H1 – H2 (mm) | 725 – 1 350 | 775 – 1 435 | 980 – 1 675 | 1 100 – 1 900 | 1 200 – 2 300 |
- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the arm and table by means of a radial-axial bearing driven by an electric motor, lifting of the arm by hydraulic cylinders – drive of cylinders from a fixed hydraulic unit driven by an electric motor.
- The positioner does not require anchoring to the floor or to a steel plate.
inch
| Type | SPK 12 | SPK 25 | SPK 50 | SPK 100 | SPK 150 |
|---|---|---|---|---|---|
| Nosnosť (kg) | 1 200 | 2 500 | 5 000 | 10 000 | 15 000 |
| Krútiaci moment stola (Nm) | 2 530 | 4 780 | 8 895 | 29 380 | 60 330 |
| Krútiaci moment ramena (Nm) | 4 610 | 10 590 | 30 592 | 53 250 | 141 500 |
| Rýchlosť zdvihu (m/min) | 1,6 | 1,6 | 1,6 | 1,2 | 1,1 |
| Rýchlosť otáčania stola (ot/min) | 0,1 – 1,1 | 0,1 – 1,4 | 0,1 – 1,3 | 0,05 – 0,7 | 0,04 – 0,6 |
| Rýchlosť otáčania ramena (ot/min) | 0,06 – 0,7 | 0,1 – 1,2 | 0,08 - 1 | 0,06 – 0,8 | 0,03 – 0,4 |
| A (mm) | 3 055 | 3 540 | 4 590 | 5 820 | 6 190 |
| B (mm) | 1 280 | 1 500 | 2 000 | 2 200 | 2 400 |
| C (mm) | 2 640 | 3 090 | 3 460 | 4 310 | 4 950 |
| D (mm) | 800 | 850 | 900 | 1 100 | 1 250 |
| E (mm) | 1 200 | 1 550 | 2 200 | 2 800 | 3 000 |
| F (mm) | 116 | 160 | 170 | 250 | 325 |
| Zdvih (mm) | 1 000 | 1 100 | 1 200 | 1 800 | 2 000 |
| H1 – H2 (mm) | 620 – 1 620 | 680 – 1 780 | 780-2 020 | 810-2 610 | 960 – 2 960 |
| Hmotnosť (kg) | 2 240 | 4 150 | 7 200 | 12 850 | 18 550 |
- Otáčanie ramena a stola pomocou radiálno-axiálneho ložiska pohonom elektromotora, zdvih ramena hydraulickými valcami – pohon valcov z pevnej hydraulickej jednotky poháňanej elektromotorom
- Možnosť posunu ramena a tým zmena polohy ťažiska polohovaného zvarenca
- Polohovadlo vyžaduje kotvenie do podlahy alebo do oceľovej platne
| Type | SPK 12 | SPK 25 | SPK 50 | SPK 100 | SPK 150 |
|---|---|---|---|---|---|
| Nosnosť (kg) | 1 200 | 2 500 | 5 000 | 10 000 | 15 000 |
| Krútiaci moment stola (Nm) | 2 530 | 4 780 | 8 895 | 29 380 | 60 330 |
| Krútiaci moment ramena (Nm) | 4 610 | 10 590 | 30 592 | 53 250 | 141 500 |
| Rýchlosť zdvihu (m/min) | 1,6 | 1,6 | 1,6 | 1,2 | 1,1 |
| Rýchlosť otáčania stola (ot/min) | 0,1 – 1,1 | 0,1 – 1,4 | 0,1 – 1,3 | 0,05 – 0,7 | 0,04 – 0,6 |
| Rýchlosť otáčania ramena (ot/min) | 0,06 – 0,7 | 0,1 – 1,2 | 0,08 - 1 | 0,06 – 0,8 | 0,03 – 0,4 |
| A (mm) | 3 055 | 3 540 | 4 590 | 5 820 | 6 190 |
| B (mm) | 1 280 | 1 500 | 2 000 | 2 200 | 2 400 |
| C (mm) | 2 640 | 3 090 | 3 460 | 4 310 | 4 950 |
| D (mm) | 800 | 850 | 900 | 1 100 | 1 250 |
| E (mm) | 1 200 | 1 550 | 2 200 | 2 800 | 3 000 |
| F (mm) | 116 | 160 | 170 | 250 | 325 |
| Zdvih (mm) | 1 000 | 1 100 | 1 200 | 1 800 | 2 000 |
| H1 – H2 (mm) | 620 – 1 620 | 680 – 1 780 | 780-2 020 | 810-2 610 | 960 – 2 960 |
| Hmotnosť (kg) | 2 240 | 4 150 | 7 200 | 12 850 | 18 550 |
- Rozmery zváracieho polohovadla sa môžu odlišovať podľa konkrétnej konfigurácie.
- Zváracie polohovadlo vyžaduje kotvenie
- Pevné upnutie do podlahy, prípadne do podlahových upínacích líšt (nie sú súčasťou dodávky polohovadla)
mm
| Type | PP 8 | PP 15 | PP 30 | PP 50 | PP 100 |
|---|---|---|---|---|---|
| Lifting capacity (kg) | 800 | 1 500 | 3 000 | 5 000 | 10 000 |
| Lifting (mm) | 625 | 660 | 695 | 800 | 1 050 |
| Table tilting torque (Nm) | 1 700 | 3 000 | 10 000 | 15 000 | 30 000 |
| Torque table (Nm) | 750 | 2 600 | 5 300 | 7 400 | 17 200 |
| Table tilting speed (°/min) | 123 | 215 | 190 | 175 | 155 |
| Table turning speed (rpm) | 0,1 – 1,7 | 0,1 – 1,5 | 0,1 – 1,4 | 0,04 – 0,6 | 0,06 – 0,9 |
| Lifting speed (m/min) | 1,2 | 1,7 | 1,1 | 1,1 | 1 |
| Table rotation radius (°) | 100 | 100 | 100 | 95 | 95 |
| A (mm) | 1 700 | 1 750 | 2 120 | 2 550 | 3 100 |
| B (mm) | 700 | 850 | 1 000 | 1 230 | 1 500 |
| C (mm) | 725 | 775 | 980 | 1 220 | 1 200 |
| D (mm) | 700 | 800 | 850 | 1 000 | 1 250 |
| H1 – H2 (mm) | 725 – 1 350 | 775 – 1 435 | 980 – 1 675 | 1 100 – 1 900 | 1 200 – 2 300 |
- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the arm and table by means of a radial-axial bearing driven by an electric motor, lifting of the arm by hydraulic cylinders – drive of cylinders from a fixed hydraulic unit driven by an electric motor.
- The positioner does not require anchoring to the floor or to a steel plate.
| Type | PP 8 | PP 15 | PP 30 | PP 50 | PP 100 |
|---|---|---|---|---|---|
| Lifting capacity (kg) | 800 | 1 500 | 3 000 | 5 000 | 10 000 |
| Lifting (mm) | 625 | 660 | 695 | 800 | 1 050 |
| Table tilting torque (Nm) | 1 700 | 3 000 | 10 000 | 15 000 | 30 000 |
| Torque table (Nm) | 750 | 2 600 | 5 300 | 7 400 | 17 200 |
| Table tilting speed (°/min) | 123 | 215 | 190 | 175 | 155 |
| Table turning speed (rpm) | 0,1 – 1,7 | 0,1 – 1,5 | 0,1 – 1,4 | 0,04 – 0,6 | 0,06 – 0,9 |
| Lifting speed (m/min) | 1,2 | 1,7 | 1,1 | 1,1 | 1 |
| Table rotation radius (°) | 100 | 100 | 100 | 95 | 95 |
| A (mm) | 1 700 | 1 750 | 2 120 | 2 550 | 3 100 |
| B (mm) | 700 | 850 | 1 000 | 1 230 | 1 500 |
| C (mm) | 725 | 775 | 980 | 1 220 | 1 200 |
| D (mm) | 700 | 800 | 850 | 1 000 | 1 250 |
| H1 – H2 (mm) | 725 – 1 350 | 775 – 1 435 | 980 – 1 675 | 1 100 – 1 900 | 1 200 – 2 300 |
- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the arm and table by means of a radial-axial bearing driven by an electric motor, lifting of the arm by hydraulic cylinders – drive of cylinders from a fixed hydraulic unit driven by an electric motor.
- The positioner does not require anchoring to the floor or to a steel plate.
inch
| Type | PP 8 | PP 15 | PP 30 | PP 50 | PP 100 |
|---|---|---|---|---|---|
| Lifting capacity (lb) | 1 764 | 3 307 | 6 614 | 11 023 | 22 046 |
| Lifting (ft in) | 2,05 | 2,17 | 2,28 | 2,62 | 3,44 |
| Table tilting torque (lb ft) | 1 253,85 | 2 212,69 | 7 375,62 | 11 063,43 | 22 126,86 |
| Torque table (lb ft) | 553,17 | 1 917,66 | 3 909,08 | 5 457,96 | 12 686,07 |
| Table tilting speed (rad/min) | 2,14 | 3,75 | 3,32 | 3,05 | 2,7 |
| Table turning speed (rpm) | 0,1 – 1,7 | 0,1 – 1,5 | 0,1 – 1,4 | 0,04 – 0,6 | 0,06 – 0,9 |
| Lifting speed (fpm) | 3,94 | 5,58 | 3,61 | 3,61 | 3,28 |
| Table rotation radius (rad) | 1,74 | 1,74 | 1,74 | 1,65 | 1,65 |
| A (ft in) | 5,58 | 5,74 | 6,96 | 8,37 | 10,2 |
| B (ft in) | 2,3 | 2,79 | 3,28 | 8,37 | 4,92 |
| C (ft in) | 2,38 | 2,54 | 3,22 | 4 | 3,94 |
| D (ft in) | 2,3 | 2,62 | 2,79 | 3,28 | 4,1 |
| H1 – H2 (ft in) | 2,38 – 4,43 | 2,54 – 4,71 | 3,22 – 5,5 | 3,61 – 6,23 | 3,94 – 7,55 |
- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the arm and table by means of a radial-axial bearing driven by an electric motor, lifting of the arm by hydraulic cylinders – drive of cylinders from a fixed hydraulic unit driven by an electric motor.
- The positioner does not require anchoring to the floor or to a steel plate.
| Type | PP 8 | PP 15 | PP 30 | PP 50 | PP 100 |
|---|---|---|---|---|---|
| Lifting capacity (lb) | 1 764 | 3 307 | 6 614 | 11 023 | 22 046 |
| Lifting (ft in) | 2,05 | 2,17 | 2,28 | 2,62 | 3,44 |
| Table tilting torque (lb ft) | 1 253,85 | 2 212,69 | 7 375,62 | 11 063,43 | 22 126,86 |
| Torque table (lb ft) | 553,17 | 1 917,66 | 3 909,08 | 5 457,96 | 12 686,07 |
| Table tilting speed (rad/min) | 2,14 | 3,75 | 3,32 | 3,05 | 2,7 |
| Table turning speed (rpm) | 0,1 – 1,7 | 0,1 – 1,5 | 0,1 – 1,4 | 0,04 – 0,6 | 0,06 – 0,9 |
| Lifting speed (fpm) | 3,94 | 5,58 | 3,61 | 3,61 | 3,28 |
| Table rotation radius (rad) | 1,74 | 1,74 | 1,74 | 1,65 | 1,65 |
| A (ft in) | 5,58 | 5,74 | 6,96 | 8,37 | 10,2 |
| B (ft in) | 2,3 | 2,79 | 3,28 | 8,37 | 4,92 |
| C (ft in) | 2,38 | 2,54 | 3,22 | 4 | 3,94 |
| D (ft in) | 2,3 | 2,62 | 2,79 | 3,28 | 4,1 |
| H1 – H2 (ft in) | 2,38 – 4,43 | 2,54 – 4,71 | 3,22 – 5,5 | 3,61 – 6,23 | 3,94 – 7,55 |
- The dimensions of the welding positioner may vary according to the specific configuration.
- Rotation of the arm and table by means of a radial-axial bearing driven by an electric motor, lifting of the arm by hydraulic cylinders – drive of cylinders from a fixed hydraulic unit driven by an electric motor.
- The positioner does not require anchoring to the floor or to a steel plate.
3D Model
Advantages of positioners KOVACO
- High reliability
- Minimal maintenance
- Work comfort
- Employee safety
- Reduced welding costt
- Increased efficiency
- Investment with a quick return on production
Need help?
Message me
3D Model
Advantages of positioners KOVACO
- High reliability
- Minimal maintenance
- Work comfort
- Employee safety
- Reduced welding costt
- Increased efficiency
- Investment with a quick return on production